To use our Cuboss Speedcube Logo Remover, we recommend that you start by lifting off the cap on the cube that the logo is on. Then dab the sponge in the polishing agent. It also works fine to apply a dab of polish directly to the logo. After that, just start scrubbing, and you will quickly notice that the logo magically starts to disappear! Most logos can be completely scrubbed off in just about a minute, depending a bit on the material you choose to scrub with. When you have finished scrubbing, you can wipe off any remaining polish from the cap and put the cap back on the cube. If you want to reuse the sponge it should be soaked and cleaned afterwards so that the polishing agent does not settle on the washing sponge itself. Then, enjoy your new speedcube without a logo on!
The Cuboss Speedcube Logo Remover container contains 5 ml of polish. Note that you only need a tiny amount, so this 5 ml is enough for a lot of cubes.
Although the product is completely safe to use, ingestion should be avoided. Potentially irritating to eyes and skin in direct contact with the polishing agent. Keep away from children.